Recent Posts

Pages: [1] 2 3 ... 10
1
Out of Production Hardware / Re: Hutron TR-210 schematic diagram ?
« Last post by cihan on June 22, 2017, 03:13:50 pm »
OK, thank you so much for your help
2
Out of Production Hardware / Re: Hutron TR-210 schematic diagram ?
« Last post by admin on June 22, 2017, 03:11:17 pm »
Sorry, I don't have a front panel schematic at this time. The front panel is pretty simple - just some switches, LEDs and a few pots. Is there a problem with it?
3
Out of Production Hardware / Re: Hutron TR-210 schematic diagram ?
« Last post by cihan on June 22, 2017, 08:27:29 am »
Thank you one more thing Front panel schematic available
I would like to ask you
4
Out of Production Hardware / Re: Hutron TR-210 schematic diagram ?
« Last post by admin on June 20, 2017, 10:48:59 am »
Hi Cihan,
Welcome to the Huntron Users Support forum.
There is no service manual available. The TR210 was a Tektronix product manufactured by Huntron. We had our own version called the Tracker 200. These are great Trackers but somewhat limited and cannot be used with the Workstation software like the current Trackers (i.e. Tracker 2800).
There was discussion about the TR210 in a past Forum thread here:
http://www.huntron.com/forum/index.php?topic=216.0
5
Out of Production Hardware / Hutron TR-210 schematic diagram ?
« Last post by cihan on June 20, 2017, 07:34:43 am »
Hi,

Do you have Hutron TR-210 schematic diagram ? 

or

service manual file available?

I would be glad if you help. :)
6
Out of Production Hardware / Re: RP388/5100DS/Workstation V3.4 Problem
« Last post by admin on June 13, 2017, 03:11:43 pm »
Try performing the Camera Offset again for the system.  When do you see the error, when setting the pin?
7
Out of Production Hardware / RP388/5100DS/Workstation V3.4 Problem
« Last post by calmissile on June 08, 2017, 11:16:15 pm »
No matter what I try in Teach Mode, I get an error message "XYZ pin position of the component are invalid".

What are the parameters that determine they are invalid?  I tried reducing the pin count to 2 pins and still get the error.
8
We have a new release of Huntron Workstation posted on the Software web page:
http://www.huntron.com/sales-support/software.htm
New features include a big revision in the CAD Import function where the old multiple window "wizard" has been replaced with a single Importer window. Some new additions to the Importer include the ability to exclude components or nets and include only nets of specific components.
The new Archive feature allows you to archive old Sequence scans to a non-active part of the database. This keeps the active database size down and results in better performance. Scans saved to the archive and be restored to the database at any time.
Cheers!
Admin
9
Technical Support Announcements / Re: Tips on the website
« Last post by jvthorsley on May 31, 2017, 04:16:45 pm »
Is the internal relay included in the diagnostic tests, I can imagine the relay contacts may get a bit pitted discharging caps after a while.
10
Technical Support Announcements / Re: Tips on the website
« Last post by admin on May 30, 2017, 06:54:48 am »
There is a internal relay that can connect test (signal) to Common.
Pages: [1] 2 3 ... 10