Recent Posts

Pages: [1] 2 3 ... 10
1
Obsolete Software / Re: Workstation 3.5.4 on older version of Windows
« Last post by admin on November 20, 2017, 07:03:11 am »
Workstation 3.5.4 just needs to be installed from a folder on the root of the hard drive using a simple name such as "huntron". Thanks for sharing, James.
2
Obsolete Software / Workstation 3.5.4 on older version of Windows
« Last post by jvthorsley on November 18, 2017, 05:41:57 am »
Recently tried to get Workstation 3.5.4 working with my ProTrack  using USB port on my Tektronix TDS 5052 oscilloscope that uses Windows 2000 Pro S/P 3.
Workstation failed to work, but then realized that Workstation has to be installed from within a folder you create called Huntron. It now works but with resolution problems of the older operating system, and the touch screen does not work so have to use mouse. But proved it was possible unlike trying to get Workstation 3.5.4 working in Windows operating systems after XP in XP mode!
Also Workstation 3.5.4 will not work with Windows XP Pro 64-bit S/P 2.
3
Out of Production Hardware / Re: rp388
« Last post by David cordero on November 17, 2017, 08:33:57 am »

thanks for so much information necessary friend.
4
Out of Production Hardware / Re: rp388
« Last post by jvthorsley on November 15, 2017, 07:40:10 am »
ProTrack Pober II connections.
5
Out of Production Hardware / Re: rp388
« Last post by jvthorsley on November 15, 2017, 07:36:38 am »
And another photo of a EDC-1000 camera card.
6
Out of Production Hardware / Re: rp388
« Last post by jvthorsley on November 15, 2017, 07:35:18 am »
EDC-2000 camera card.
7
Out of Production Hardware / Re: rp388
« Last post by jvthorsley on November 15, 2017, 07:33:03 am »
EDC-2000 camera card connections.
8
Out of Production Hardware / Re: rp388
« Last post by jvthorsley on November 15, 2017, 04:43:49 am »
Click on this link for more information about the camera:- http://adsabs.harvard.edu/full/1990IAPPP..39....1Z
9
Out of Production Hardware / Re: rp388
« Last post by David cordero on November 14, 2017, 11:18:25 am »

ok now, now I know what I need, thanks curtis and apologize for not understanding before because I did not know what that card was like because I have never seen one, only now.
10
Out of Production Hardware / Re: rp388
« Last post by admin on November 14, 2017, 11:12:14 am »
Hi David,
I have answered your question several times about the camera card.
FYI, here is what the EDC1000 looked like:



You may be able to get a different camera mounted but you will not find support in the software.
Good luck.
Pages: [1] 2 3 ... 10