lents mil

Started by David cordero, February 07, 2019, 12:38:40 PM

Previous topic - Next topic

David cordero


Hi how many millimeters is the lens that the camera uses for the Huntron accses?

jvthorsley

Hi David
Something last in translation here! Are you asking what the Focal Length of the lens is?
Usually this is engraved on the mount of the lens, but Curtis should have the answer to this.
As I have found previously there is always some data out there on Google.

David cordero

Hi friend
how are you

the camera has no lens and there are many measures buy a 50mm but it gives too much Zoom and it does not let me see the complete pieces if not just the legs of the ic.

jvthorsley

#3
Hi David
lower Focal length than 50 mm would give you a wider field of view. Try 25 mm. Is this what you are looking for.
You might even find an old camera with a lens you could use in a junk shop, or even EBay!
What is the internal diameter of the camera mounting the lens screws into?

admin

Sorry I missed this post.
The Access uses a 25mm/f1.4 C-mount lens.
Cheers!
The most important troubleshooting tool is your eyes.

David cordero

ok can this be?

jvthorsley

You need to be sure the mount is the correct diameter / thread size.

David cordero


if this one brings different adapters, for the models of available threads I think that this already solved everything, thank you very much for your assistance friends, I will send photos at the end of the project.