Recent Posts

Pages: 1 2 [3] 4 5 ... 10
21
General Discussion / Re: What can and can't the Huntron do?
« Last post by admin on April 03, 2018, 10:41:49 am »
Welcome to the Huntron Users Support Forum, CoraDias!

I agree that more complex ICs can fail in a way that you will not see the effect of that failure at the pins. It would like trying to troubleshoot a complex circuit board from the connectors only. The good news (if you want to call it "good") is that core failures of complex ICs are fairly rare since these problems are mostly caused by process issues during manufacture. These ICs will almost always fail the first time they are powered up.
22
General Discussion / Re: What can and can't the Huntron do?
« Last post by CoraDias on April 03, 2018, 08:56:28 am »
Hi...i am a new user here. As per my knowledge it is possible that an electrical failure can occur deep inside a more complex IC and therefore be masked at the pin level where you have test access.There is not a list of what can and cannot be tested because a Tracker is a general purpose tester. It is used by people on the majority of existing electronic components.

smt circuit board assembly
23
General Discussion / Re: Black Vertical line centered on Display Huntron Tracker 2700
« Last post by admin on March 30, 2018, 07:16:41 am »
Never heard what the resolution was for the display problem. Maybe he will respond here.
24
So what is it a loose connection or new LCD panel required?
25
Out of Production Hardware / Re: pedal for tracker DSI 700
« Last post by jvthorsley on March 29, 2018, 02:05:26 am »
Hello David
Thought you might find the attached DSI 700 to PC Cable Interface diagram useful.
26
Out of Production Hardware / Re: pedal for tracker DSI 700
« Last post by jvthorsley on March 29, 2018, 01:06:46 am »
Hello David                                                                                                                                                         
Hope the attachment from the DSI 700 User's Manual helps.
Any good foot switch from an electronic component supplier would do the job with the appropriate size jack plug.
27
Out of Production Hardware / Re: pedal for tracker DSI 700
« Last post by admin on March 28, 2018, 06:48:22 am »
I believe the foot pedal diagram has been posted on the Forum before. I will look around and reply more.

Edit: Looked at the DSI700 information and the foot pedal was a simple two wire switch to a headphone style jack.
28
Out of Production Hardware / pedal for tracker DSI 700
« Last post by David cordero on March 27, 2018, 07:05:59 pm »
Hello forum friends, any of you can provide a diagram for me to build a pedal for my DSI 700 scanner.
29
Out of Production Hardware / Re: Technical Issue with 3x Tracker 2700 and 2700S
« Last post by emanuxelz on March 19, 2018, 06:55:41 pm »
The "good" was repaired. It was a 1k resistor I don't remember wich one but I think it was a reference voltage or something
30
Out of Production Hardware / Re: Technical Issue with 3x Tracker 2700 and 2700S
« Last post by jvthorsley on February 22, 2018, 04:26:39 pm »
Sounds like capacitors that have developed high ESR on the low voltage P.S.U.
Have you a meter to measure ESR? Their almost as good as a working Huntron!
Pages: 1 2 [3] 4 5 ... 10