Black Vertical line centered on Display Huntron Tracker 2700

Started by sdk1959, July 17, 2014, 11:56:23 AM

Previous topic - Next topic

sdk1959

I have a Huntron Tracker 2700 that has a black vertical line in the exact center of the display. It just started doing this this week 6/14/14. I tried powering it off and on several times to no avail. I also did the diagnostics, passed. It was not in use when I first noticed it. I just powered it up and it was there. It does not seem to affect the functions of the tracker, works as normal but is very annoying to have it constantly on the display.

Has anyone else had this problem with the 2700? Any solutions or least what causes it?

admin

Welcome to the Huntron Support Forum.
It is very likely a problem with the display itself. One column of pixels must be down. The only remedy may be a new display but open the unit up and check all of the connections to the front panel assembly. Maybe it is only a loose connector.
Thanks.
Admin
The most important troubleshooting tool is your eyes.

sdk1959

Should the Huntron 2700 need a new display is it available from Huntron? ???

admin

We do some in stock, part number 07-4077. Contact us directly if you are considering an order.
Thanks.
Admin
The most important troubleshooting tool is your eyes.

jvthorsley

So what is it a loose connection or new LCD panel required?

admin

Never heard what the resolution was for the display problem. Maybe he will respond here.
The most important troubleshooting tool is your eyes.