rp388

Re: rp388
« Reply #15 on: November 10, 2017, 08:59:45 am »
Hi
I did have one of these cards, and sold it with a Prober.
I'm sure you could source one through Ebay.
I could not get the Prober working properly and was not impressed with the performance of the camera. Also the boards I test are best tested by plugging in connectors, there not really suitable for a prober. If you have lots of boards of the same type to repair then makes sense to invest in a prober. I had two of the older Probers and got one camera card from a local company & the other from Huntron in France.

Re: rp388
« Reply #16 on: November 10, 2017, 06:39:36 pm »
Hello thanks for the information, I have found it very difficult to find information on this team and even thought I made a bad investment, everyone who can have a computer does not tell me what card I need to install on the PC to start walking this, I bought the Huntron CD and it was another money expense because I could not find that information and when I asked huntron for information, I just need to connect the camera or adapt a camera of an acces but they are making it difficult for me.

Re: rp388
« Reply #17 on: November 11, 2017, 11:12:58 pm »

Re: rp388
« Reply #18 on: November 13, 2017, 03:54:26 pm »

Re: rp388
« Reply #19 on: November 14, 2017, 02:11:06 am »
What information do you need?

Re: rp388
« Reply #20 on: November 14, 2017, 02:28:13 am »
Hello David
Looking to see if I still have any more information on this.

Re: rp388
« Reply #21 on: November 14, 2017, 02:32:36 am »
The company in France shown on attached photo supplied me the upgrade camera for the Prober.

Re: rp388
« Reply #22 on: November 14, 2017, 02:44:52 am »
This contact in France may be able to help with your Prober Camera.
His name: Philippe DUBECQ
And email: philippe.dubecq@dems-fr.com
Hope he can help you, he supplied me with a camera upgrade for the Pober.
James Horsley

Re: rp388
« Reply #23 on: November 14, 2017, 06:26:01 am »

Hello friend, thanks for such valuable information, I think that with this I can solve the problem, very grateful for your information, brother, thank you very much for your help.

Re: rp388
« Reply #24 on: November 14, 2017, 07:47:23 am »
Pleased to help David
If you need any other diagrams email on james.horsley@btinternet.com .

Re: rp388
« Reply #25 on: November 14, 2017, 09:27:48 am »

thanks friend, look i found this pc is that the video card for the cam electrim edc 1000 ?.

Re: rp388
« Reply #26 on: November 14, 2017, 09:40:34 am »
Hello David
Yes,  looks the same as I had.
James Horsley

admin

  • Huntronian
  • 309
    • HUNTRON.COM
    • Email
Re: rp388
« Reply #27 on: November 14, 2017, 11:12:14 am »
Hi David,
I have answered your question several times about the camera card.
FYI, here is what the EDC1000 looked like:



You may be able to get a different camera mounted but you will not find support in the software.
Good luck.
The most important troubleshooting tool is your eyes.

Re: rp388
« Reply #28 on: November 14, 2017, 11:18:25 am »

ok now, now I know what I need, thanks curtis and apologize for not understanding before because I did not know what that card was like because I have never seen one, only now.

Re: rp388
« Reply #29 on: November 15, 2017, 04:43:49 am »
Click on this link for more information about the camera:- http://adsabs.harvard.edu/full/1990IAPPP..39....1Z