help

help
« on: January 15, 2019, 05:48:42 pm »
Hello, why does this happen?
« Last Edit: January 15, 2019, 05:53:03 pm by David cordero »

jvthorsley

  • 169
  • Do what you do well, and if a Huntron help use it.
    • www.jhorsley.com
    • Email
Re: help
« Reply #1 on: January 16, 2019, 10:52:15 am »
Hello David
Looks to me like you have selected the wrong hardware in Hardware Settings.
Are you using a ProTrack with your Prober setup?

Re: help
« Reply #2 on: January 16, 2019, 11:14:54 am »

Hello James
is not the rp 388 I think I'll have to delete the program and reinstall it

jvthorsley

  • 169
  • Do what you do well, and if a Huntron help use it.
    • www.jhorsley.com
    • Email
Re: help
« Reply #3 on: January 16, 2019, 01:18:03 pm »
Hi David
You shouldn't have to reload the software, is the Huntron you are using listed on the version of Workstation 3.4 you have?

Re: help
« Reply #4 on: January 16, 2019, 02:05:00 pm »
if friend is on the list, I could solve the problem reinstall it again and it worked well, I could also adapt a color camera and I am happy to have finished this project.