CONTACT HUNTRON TO PURCHASE A SOFTWARE MANUAL!

Thank you for installing Huntron Instruments 
Workstation for Windows software.  This is the 
latest version of software that combines the power 
of Huntron’s ASA power-off testing with the Windows 
operating system.  Refer to New Features in the Help 
for information on what has changed.

Workstation for Windows version 2.2 is only possible 
because of the input from our customers.  Thank you.


      ****** PLEASE READ BEFORE INSTALLING ******



            ********************* 
                  Huntron 
              Technical Support

               (800) 426-9265 
               (206) 743-3171 
             (206) 743-1360 FAX
             (206) 338-3833 BBS
            ********************* 
 

      ***** INSTALLATION PROCEDURE ***** 

The following directions describe how to use the 
SETUP.EXE program supplied on this disk. 

NOTE: <Enter> means press the Enter or Return key. 

1.  Start Windows and close any other applications 
that are running.

2.  Place the floppy disk labeled Disk 1 of 3 into 
the floppy drive. 

3.  In Program Manager, select Run from the File 
menu. For Windows 95 Press Start then Run...

4.  In the Command line box, type the letter of the 
drive that contains the floppy disk, followed by a 
colon (:) and backslash (\), and the word "setup". 

For example: "a:\setup"

5.  The installation program will prompt you with 
further instructions including when to insert the 
rest of the disks. 

6. A new Program group called "Huntron" will be
created in the Windows Program Manager. For Windows 
95, Huntron will be added to Programs on the Start 
menu. Click the Huntron icon to start Huntron 
Workstation for Windows program. 

