README for Huntron Workstation Software

This software runs only on Windows 2000 and Windows XP. Please upgrade to the latest service packs. The installation requires Administrator Rights to the computer. After installation, the application can be run by a Standard User.
 
1) This software will run on a combination of Huntron hardware. If you have a ProTrack and scanner only, follow the installation instructions in the ProTrack Users manual located on the manual CD (06-5217, section 9 - remote mode).

2) If you have a ProTrack and an Access Prober, follow the installation instructions in the "getting started instructions" (21-1344) that is packaged with your hardware. These instructions are repeated in the Huntron Access user's manual located on the manual CD (06-5217, Section 4 page 4-1).

3) If you have a Prober IIc or Prober IIIc, follow the installation instructions in the "getting started instructions" (21-1333) that was packaged with your hardware. These instructions are repeated in the ProTrack Prober IIc/IIIc
users manual located on the manual CD (06-5217, Section 3).

4) This software requires activation and is only licensed to be used on specific Huntron hardware. The activation codes are generated by Huntron and are specific to the Tracker PXI, ProTrack, Prober IIc, Prober IIIc and Access Prober hardware serial numbers. The activation codes are printed on the each CD. If using a Tracker and a Prober then enter the activation code from each CD.

5) All Huntron manuals are located on the manual CD (06-5217). 

6) After installing the software, it is advisable to refer to the Workstation tutorial. This tutorial will guide you through the basic software features. The tutorial is located on the Software CD and can also be read by clicking on the Help menu of the software.

If using a prober complete the follwing steps

7) Install the NI Vision for Auto Align software. Use your Browsers Back button to return to the main CD menu. Select Install NI Vision for Auto Align (or browse the CD, locate the Vision folder and execute the file vison80rte.exe). Exit the CD software by clicking Exit.

8) Run the NI License Manager by selecting Start, Programs, National Instruments, NI License Manager. Click the Activate button on the toolbar. Follow the instructions to enter your NI license serial number. This serial number is printed on the Huntron software CD and/or is located in your NI Certificate of Ownership. 
 

************ NOTE FOR Prober USERS ****************
If you are running the software on a non U.S. Version of Windows, you may experience problems with the Sensoray Frame Grabber. If so, follow the instructions below: 

1. Click Start, Run, type in "regedt32" 
2. Select the window titled HKEY_LOCAL_MACHINE. 
3. From menu select Security/Permissions 
4. Highlight the user that is currently logged in (it will probably be highlighted by default). 
5. Check the box on the intersection of "Allow" column and "Full Control" row.  
6. Check the box "Allow inheritable permissions...". 
7. Click on "Apply" button. 
8. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\PCI 
9. Find a folder that starts with VEN_109E&DEV_036E&SUBSYS_03116000 (for 311 board) or VEN_109E&DEV_036E&SUBSYS_06116000 (for 611 board) or VEN_109E&DEV_036E&SUBSYS_07116000 (for 711 board) and expand it.  
10.You will see one or more folders there with names looking like (but not necessarily exactly like) the following: 3&61aaa01&0&68. 
11. For each of those folders do the following: 
   a) click on the folder name. The device information will be displayed in the right panel. 
   b) find and double click on the item DeviceDesc. It should have the value that says "Sensoray 311 Frame Grabber" (or 611, or 711). 
   c) append text to this string so that it says the following "Sensoray X11 Frame Grabber #x bus_0,dev_y,func_0", where x, y should be unique numbers for every folder found in step 10. For example, the first folder may have the following Sensoray X11 Frame Grabber #1 bus_0,dev_0,func_0, the second - Sensoray X11 Frame Grabber #2 bus_0,dev_1,func_0, etc. 
12. Close regedt32.  
13. Reboot.  



For Assistance Contact:

Huntron, Inc.
15720 Main Street, Suite 100
Mill Creek, WA 98012

Toll-Free (800) 426-9265
Phone     (425) 743-3171
Fax       (425) 743-1360
Email     info@huntron.com
Web       http://www.huntron.com
