README for Huntron Workstation Software

This software runs only on Windows XP SP2, Windows Vista and Windows 7. Only 32 Bit version are supported, 64 bit versions are not supported. Please upgrade to the latest service packs and patches. The installation requires Administrator Rights to the computer. After installation, the application can be run by a Standard User. 

Parallel Port Protrack's do not operate under Windows Vista or Windows 7.
 
1) This software will run on a combination of Huntron hardware. Refer to the users manual of the product, found on the manual CD (06-5217).

2) This software requires activation and is only licensed to be used on specific Huntron hardware. The activation codes are generated by Huntron and are specific to the Tracker PXI, ProTrack, Prober IIc, Prober IIIc and Access Prober hardware serial numbers. The activation codes are printed on the each CD. If using a Tracker and a Prober then enter the activation code from each CD.

3) All Huntron manuals are located on the manual CD (06-5217). 

4) Install Huntron Workstation

5) If using a Access USB or Access 2 USB prober, Install the Sensoray 2250 SDK. Use your Browsers Back button to return to the main CD menu. Select Install Camera for Access USB and Access 2 USB (or browse the CD, locate the Vision folder and execute the file 2250Setup.exe). Use all of the defaults during the installation and install ffdshow when prompted.

6) If using a prober, Install the NI Vision for Auto Align software. Use your Browsers Back button to return to the main CD menu. Select Install NI Vision for Auto Align (or browse the CD, locate the Sensoray2250 SDK folder and execute the file vison80rte.exe). 

7) If using a prober, Run the NI License Manager by selecting Start, Programs, National Instruments, NI License Manager. Click the Activate button on the toolbar. Follow the instructions to enter your NI license serial number. This serial number is printed on the Huntron software CD and/or is located in your NI Certificate of Ownership. 

8) After installing the software, it is advisable to refer to the Workstation tutorial. This tutorial will guide you through the basic software features. The tutorial is located on the Software CD and can also be read by clicking on the Help menu of the software.


************ NOTE FOR Non-USB Prober USERS ****************
If you are running the software on a non U.S. Version of Windows, you may experience problems with the Sensoray X11 Frame Grabber. If so, follow the instructions below: 

1. Click Start, Run, type in "regedt32" 
2. Select the window titled HKEY_LOCAL_MACHINE. 
3. From menu select Security/Permissions 
4. Highlight the user that is currently logged in (it will probably be highlighted by default). 
5. Check the box on the intersection of "Allow" column and "Full Control" row.  
6. Check the box "Allow inheritable permissions...". 
7. Click on "Apply" button. 
8. Go to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\PCI 
9. Find a folder that starts with VEN_109E&DEV_036E&SUBSYS_03116000 (for 311 board) or VEN_109E&DEV_036E&SUBSYS_06116000 (for 611 board) or VEN_109E&DEV_036E&SUBSYS_07116000 (for 711 board) and expand it.  
10.You will see one or more folders there with names looking like (but not necessarily exactly like) the following: 3&61aaa01&0&68. 
11. For each of those folders do the following: 
   a) click on the folder name. The device information will be displayed in the right panel. 
   b) find and double click on the item DeviceDesc. It should have the value that says "Sensoray 311 Frame Grabber" (or 611, or 711). 
   c) append text to this string so that it says the following "Sensoray X11 Frame Grabber #x bus_0,dev_y,func_0", where x, y should be unique numbers for every folder found in step 10. For example, the first folder may have the following Sensoray X11 Frame Grabber #1 bus_0,dev_0,func_0, the second - Sensoray X11 Frame Grabber #2 bus_0,dev_1,func_0, etc. 
12. Close regedt32.  
13. Reboot.  



For Assistance Contact:

Huntron, Inc.
15720 Main Street, Suite 100
Mill Creek, WA 98012

Toll-Free (800) 426-9265
Phone     (425) 743-3171
Fax       (425) 743-1360
Email     info@huntron.com
Web       http://www.huntron.com
