Flexible, automated diagnostic solutions to help people solve circuit card problems.
NEW Huntron Tracker Model 30
View the Tracker Model 30 Presentation
Tracker Model 30 Specifications
Tracker Model 30 Included Accessories
Tracker Model 30 Optional Accessories
Tracker Accessories datasheet
Compact Tracker Designed for Huntron Workstation software
The Huntron Tracker Model 30 is a new compact Tracker designed for use with Huntron Workstation and accessories such as the New Scanner II, the new Scanner 31S
or an Huntron Access Prober. Take advantage of Tracker
Signature Analysis capabilities to help you troubleshoot printed circuit board (PCB) faults to the component level and without applying power, saving circuits
from possible further damage.
The Tracker Model 30 enables the user to set the applied voltage, frequency and source resistance to best match the circuit characteristics and display the
optimum Tracker signature. The power of Huntron Workstation allows for the creation of Tracker Model 30 test routines and signature storage.
To view a presentation that covers more Tracker Model 30 details, visit the Tracker Model 30 Presentation.
Highlights
- Add the benefits of Power-Off test to your current diagnostic test strategy
- Match the circuit impedance by setting the applied voltage, frequency and source resistance
- Interface to the Huntron Access Prober, Scanner 31S or Scanner II
- Use Huntron Workstation software for test creation and signature storage
The Huntron Tracker Model 30
is controlled by the Huntron Workstation 4 software for test database creation and signature capture. Signatures from known good PCBs
are stored in the test database and
used for comparison when troubleshooting suspect PCBs.
Interfacing the Huntron Tracker Model 30 to test points can be accomplished manually using Huntron Microprobes, Scanner 31S, Scanner II,
or automatically when used with a Huntron Robotic Prober such as the Huntron Access USB Prober.
Specifications- Tracker Model 30
| ELECTRICAL (Note: Test Signal is a sine wave.) |
|
| Open Circuit Voltage (Vs): | |
| 24 selections of peak voltage: | 200mV, 400mV, 600mV, 800mV, 1V to 20V in 1V steps including 10V (Low), 15V (Med 1), 20V (Med 2) |
| Source Resistance (Rs): | |
| 16 selections of resistance: | 10Ω, 20Ω, 50Ω, 100Ω, 200Ω, 500Ω, 1kΩ, 2kΩ, 5kΩ, 10kΩ, 20kΩ, 50kΩ, 100kΩ, 54Ω (Low), 1.2kΩ (Med 1), 26.7kΩ (Med 2) |
| Frequency (fs): | |
| 40 selections of frequency: | 20Hz to 190Hz in 10Hz steps; 200Hz to 1.9kHz in 100Hz steps; 2kHz to 5kHz in 1kHz steps |
| Connections | BNC (Ch. A; Ch. B; Com.), banana (Ch. A; Ch. B; Com.) |
| Auxillary Connection | 9 pin mini jack with ground, Trigger IN, Trigger OUT, Calibration TP, Sine wave zero-crossing, Signal ON, Line IN and Line OUT |
| GENERAL | |
| Part Number | 99-0392 |
| Dimensions | 11.1in W x 1.8in H x 8.6in D (28.2cm W x 4.6cm H x 21.8cm D) |
| Warranty | 1 year limited |
| Certifications | CE and ETL listed |
Included Accessories
| Included Accessories | ||
| MP20 Microprobes | Part number 98-0249 | Buy Now |
| Manual on CD | Part number 06-5217 | Buy Now |
| 2 Common leads | Part number 98-0043 | - |
| Workstation software | Part number 98-0463 | - |
| Power cord | Part number 98-0015 | - |
| 10K ohm jumper lead | Part number 98-0028 | - |
| 1K ohm jumper lead | Part number 98-0029 | - |
| USB cable | Part number 98-0418 | - |
