Flexible, automated diagnostic solutions to help people solve circuit card problems.
Huntron Scanners
Add Scanning Capabilites to Your Huntron Tracker Model 30 System
 |
Adding a Huntron® Scanner to your Tracker Model 30 system lets you access components using standard DIP clips
and cables, custom cables to PCB connectors or
interface to a bed-of-nails.
You can compare one component with another in real-time (64 pins max.) or use your PC to automate testing and scan up to 128 pins.
Huntron Scanners can be used with a Huntron Access Prober to provide Common line connections while the Prober is probing a PCB. This method gives you up to 128 selectable Commons
to use. For example, you can connect the Scanner to a connector on a PCB mounted in the Prober using a common ribbon style cable. While the Prober is probing, any one of the lines
on the connected ribbon cable can be selected as the Common reference. This would provide you true point-to-point testing capabilities.
Note: The ProTrack Scanner will be replaced by the Scanner II and/or the Scanner 31S effective 1/1/2008. This applies to commercial sales only.
Scanner II and Scaner 31S users may want to consider these Optional Accessories to enhance their test capabilities.
Highlights:
- The Scanner II and Scanner 31S accessories add scanning capability to the Tracker Model 30
- All Scanners have a minimum 64 pin capability
- The Scanner II can scan up to 128 pins when the A and B channels are combined
- The Scanner 31S use standard IDC style connectors
- The Scanner II uses the common SCSI-2 (68 pin) style connectors
- Up to 8 Scanner IIs can be “daisy-chained” to increase the available number of test pins
Selecting Accessories for your Scanner II
The Scanner II accessories for interfacing to your printed circuit board come "ala carte". This means that you select the accessories you want included with your Scanner.
Choose from SMT or through-hole style DIP clip and cable kits (Scanner Adapter required with Scanner II) or a mutli-pin breakout cable. Details on these accessories are provided on this page.
Go to Scanner Accessories information
Specifications
| Max. Number of Test pins | |
| Scanner II Scanner 31S ProTrack Scanner |
128 (per Scanner) 64 128 (both channels combined) |
| Number of Channels | |
| Scanner II Scanner 31S ProTrack Scanner |
2 1 2 |
| Number of Pins per Channel | |
| Scanner II Scanner 31S ProTrack Scanner |
64 64 64 |
| Front Panel Connectors | |
| Scanner II Scanner 31S ProTrack Scanner |
SCSI-2 (68 pins) IDC IDC |
| Part Number | |
| Scanner II Scanner 31S ProTrack Scanner |
99-0393 99-0399 99-0098 |
| Dimensions (Scanner II and 31S) | 11.1in W x 1.8in H x 8.6in D (28.2cm W x 4.6cm H x 21.8cm D) |
| Certifications | CE and ETL listed |
| Warranty | 1 year limited |
Supplied Accessories with Scanners
| Huntron P/N | Qty | Description | Available Online? |
| All Scanners | |||
| 06-5217 | 1 | Manuals CD | Buy Now! |
| Scanner II | |||
| 98-0480 | 1 | Interface Cable | - |
| Scanner 31S | |||
| 98-0103 | 1 | Cable Assembly, 20 pin clip | Buy Now! |
| 98-0102 | 1 | Cable Assembly, 40 pin clip | Buy Now! |
| 07-1234 | 1 | Clip, 20 pin | - |
| 07-1230 | 1 | Clip, 40 pin | - |
| 98-0480 | 1 | Interface Cable | - |
Optional Accessories for Scanners
Optional accessories for the Scanners
include a connection
adapter and IC clip kits. These accessories assist in making the connection to your printed circuit
boards easier and helping to speed test times. The Scanner II with the Adapter and a SMT clip/cable are shown to the left.
 |
Scanner Adapter - Part# 98-0491 |
||
 |
SMT SOIC Clip Kit - Part# 98-0492 |
||
 |
Through-hole (standard) DIP Clip Kit - Part# 98-0490 |
||
 |
68 pin Breakout cbale for the Scanner II - Part# 98-0493 |